The following well produced video shows the stages involved in making a Go-Kart using the Dirt Devil kart plans. The stages shown in the video below are:
- Welding, Cutting and making the Chassis
- Obtaining parts for the Suspension
- The 18hp Engine
- The Rear brake Calliper
- Steering Setup
- Testing and Racing the Go-Kart with Suspension
A lot of parts were taken from a quad and an other working go-kart! The suspension seems to work very well, however the camber angle on the front wheels seems too much. The front wheels are splayed out sidewards. Perhaps this is the suspension, but ideally this would need to be readjusted. Read more on camber angles here.